Electric fan muscle car Mustang?

Pete asked:


Iv'e heard that the best electric fans to purchase, are from a late model Taurus or what not. Anyways, here's my setup, I have a 66 'Stang; with a built engine producing around 500 hp. I have a radiator that measures 16 1/2 by 16 1/2, and from the radiator to the water pump pulley I have only 4 inches clearance. My question is, will a Taurus fan work? I'm worried about the clearance from the water pump to radiator. And from what Iv'e seen the Taurus fans are normally around 5 inches thick. Any one had any similar experience putting one of these fans on their hot rod? Your advice is great appreciated.
Truck Fan
Share and Enjoy:
  • Digg
  • Sphinn
  • del.icio.us
  • Facebook
  • Mixx
  • Google Bookmarks

Tags: , ,

2 Responses to “Electric fan muscle car Mustang?”

  1. ckwiatko89 says:

    muscle car

    use the factory clutch fan and you won’t be sorry when the electric fan doesn’t cool enough.The regular fan can consume 20 and sometimes more horsepower but the clutch fans although heavy will usually use less than 5 because the clutch doesn’t let the fan go faster than 2500 rpm. If you must have an electric fan get the Black Majic one listed in the Summit catalog so it will cool a 500 HP engine

  2. HMUSN says:

    Hybrid Nation

    the taurus fan would work fine. clutch fans are inefficient because they can only turn out 2500 cfm in the first place. They also rob you of more HP then an electric fan would because they are clutch driven.

    The taurus fan turns at around 3500 rpm and a fan out of a mark8 is good for 4500 rpm. for 500 crank hp the taurus fan will cool down your car well enough.

    I had a 91 stang with 520rw and my taurus fan worked fine.

Leave a Reply

Powered by WP Hashcash